This post is a continuous post for working on setting up my EUServ’s IPv6-Only vps. It summarizes some of typical usages which I usually will do on normal VPS. Of course it can do more than what I put in this post. I will keep updating once I found some interesting usage for this small IPv6-Only VPS.
Related Post
VPS Benchmark
Once your EUserv’s VPS is up and running, you can first SSH connect to the VPS which has both IPv4 and IPv6 address, then from there connect to EUServ’s VPS IP or DNS name:
root@ip-172-31-23-170:~# ssh srv18598.blue.kundencontroller.de
root@ip-172-31-23-170:~# ssh 2a02:0180:0006:0001:0000:0000:0000:34d5
You also can use online terminal, such as sshgate from (https://www.redcoolmedia.net/sshgate/), to do this kind of connection.
After logged into EUServ’s IPV6-Only VPS, you can issue following command to get benchmark script and run it. Please make sure you already configured resolv.conf file to have IPv4 outbound connection ability.
wget -qO- bench.sh | bash
Or
curl -Lso- bench.sh | bash
Results:
[root@srv18598 ~]# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU Model : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz
CPU Cores : 1
CPU Frequency : 3713.235 MHz
CPU Cache : 8192 KB
Total Disk : 9.8 GB (1.8 GB Used)
Total Mem : 976 MB (40 MB Used)
Total Swap : 976 MB (0 MB Used)
System uptime : 21 days, 2 hour 31 min
Load average : 27.54, 23.66, 13.59
OS : CentOS Linux release 7.9.2009 (Core)
Arch : x86_64 (64 Bit)
Kernel : 4.20.8-1.el7.elrepo.x86_64
TCP CC : cubic
Virtualization : LXC
Organization : AS29432 TREX Regional Exchanges Oy
----------------------------------------------------------------------
I/O Speed(1st run) : 83.7 MB/s
I/O Speed(2nd run) : 74.8 MB/s
I/O Speed(3rd run) : 77.0 MB/s
Average I/O speed : 78.5 MB/s
----------------------------------------------------------------------
Node Name Upload Speed Download Speed Latency
Speedtest.net 119.77 Mbps 15.41 Mbps 31.87 ms
Beijing CU 59.62 Mbps 3.20 Mbps 273.41 ms
Shanghai CT 17.59 Mbps 1.09 Mbps 256.54 ms
Shanghai CU 32.96 Mbps 4.27 Mbps 321.16 ms
Guangzhou CT 17.24 Mbps 0.99 Mbps 265.26 ms
Guangzhou CU 35.49 Mbps 1.37 Mbps 301.55 ms
Shenzhen CU 41.36 Mbps 2.86 Mbps 224.77 ms
Hongkong CN 42.09 Mbps 7.53 Mbps 258.92 ms
Singapore SG 17.14 Mbps 2.30 Mbps 380.55 ms
Tokyo JP 20.44 Mbps 3.94 Mbps 309.06 ms
----------------------------------------------------------------------
Install Nodequery Agent
Nodequery stopped the service since Sep 2021.
[root@srv18598 ~]# wget -N --no-check-certificate https://raw.github.com/nodequery/nq-agent/master/nq-install.sh && bash nq-install.sh BeWc7a4jl8q7GRSgWfl2xrtPeKV9LGJf
--2021-02-19 02:55:46-- https://raw.github.com/nodequery/nq-agent/master/nq-install.sh
Resolving raw.github.com (raw.github.com)... 2001:67c:2b0:db32:0:1:b9c7:6e85, 2001:67c:2b0:db32:0:1:b9c7:6c85, 2001:67c:2b0:db32:0:1:b9c7:6d85, ...
Connecting to raw.github.com (raw.github.com)|2001:67c:2b0:db32:0:1:b9c7:6e85|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://raw.githubusercontent.com/nodequery/nq-agent/master/nq-install.sh [following]
--2021-02-19 02:55:53-- https://raw.githubusercontent.com/nodequery/nq-agent/master/nq-install.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 2001:67c:2b0:db32:0:1:b9c7:6e85, 2001:67c:2b0:db32:0:1:b9c7:6f85, 2001:67c:2b0:db32:0:1:b9c7:6c85, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|2001:67c:2b0:db32:0:1:b9c7:6e85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4781 (4.7K) [text/plain]
Saving to: ‘nq-install.sh’
100%[====================================================================================================================================================================>] 4,781 --.-K/s in 0.1s
Last-modified header missing -- time-stamps turned off.
2021-02-19 02:55:53 (41.8 KB/s) - ‘nq-install.sh’ saved [4781/4781]
|
| NodeQuery Installer
| ===================
|
| Downloading nq-agent.sh to /etc/nodequery
|
| + 2021-02-19 02:56:00 URL:https://raw.githubusercontent.com/nodequery/nq-agent/master/nq-agent.sh [8537/8537] -> "/etc/nodequery/nq-agent.sh" [1]
|
| Success: The NodeQuery agent has been installed
|
[root@srv18598 ~]#
Install BT Panel
curl -sSO http://download.bt.cn/install/new_install.sh && bash new_install.sh
[root@srv18598 ~]# curl -sSO http://download.bt.cn/install/new_install.sh && bash new_install.sh
+----------------------------------------------------------------------
| Bt-WebPanel 7.0 FOR CentOS/Ubuntu/Debian
+----------------------------------------------------------------------
| Copyright © 2015-2099 BT-SOFT(http://www.bt.cn) All rights reserved.
+----------------------------------------------------------------------
| The WebPanel URL will be http://SERVER_IP:8888 when installed.
+----------------------------------------------------------------------
Do you want to install Bt-Panel to the /www directory now?(y/n): y
References
How to install docker container on EUServ free server?
It depends on which linux release you are using. Check this post which covers CentOS and Ubuntu: https://blog.51sec.org/2021/05/docker-dockercompose-portainer-nginx.html