My company has used Avocent ACS (Advanced Console Server) to do network devices’ console management for many years already. I were using 4000, 5000 and 6000 serie, and now 8000 series is coming to refresh some old ones.
Emerson (EMR) acquired infrastructure management specialist Avocent Corporation (AVCT) for $1.2 billion on Oct 2009. Since then Emerson combined its Aperture and new Avocent businesses as a new division focused on helping data center customers better manage their infrastructure. Now it is part of Vertiv which launched as standalone business. The Vertiv’s Trellis DCIM platform was the first to use real-time data to enhance data center management and has been recognized as a leader in every DCIM Magic Quadrant published by Gartner.
Interesting thing is I even could not find Avocent product from Vertiv’s product page. Totally there are 13 products under IT management category, but ACS product line is not there. I managed to google and find one link which shows more this product at this link: https://www.vertivco.com/en-us/products-catalog/monitoring-control-and-management/it-management/avocent-acs-8000-serial-consoles/
 |
| Emerson Avocent ACS8000 Front |
“The Avocent® ACS 8000 advanced console server series continues the long running success story with a new, ground-up platform of innovation, integrating important new connectivity features such as gigabit fiber, USB and sensors. IT professionals and network operations center (NOC) personnel can now harness these new capabilities to further enable them to perform secure, remote data center management and out-of-band management of IT assets from anywhere in the world. Featuring a dual-core ARM processor architecture with expanded memory capabilities, the updated Linux operating system and DSView™ management software, provides the Avocent® ACS 8000 optimal performance, security, reliability for a complete out-of-band management solution.” – from ACS 8000’s data sheet brochure.
Here are some basic configuration steps I did.
1. Console in device to configure static ip and gateway
Using one of the supplied RJ-45 console
adaptors, connect a terminal or
workstation to the Console port. The
console system is configured using a
terminal or terminal emulator with session
settings of: 9600, 8, N and 1, with no
flow control.
Log in to the console system as admin,
with the default password avocent. At the
command prompt, enter wiz to view the
current IP configuration.
login: admin
Password:
Welcome to ACS8000 <ACS8032-0530044575>.
Type help for more information.
--:- / cli-> help
- Thank you for using the cli -
Some basic and useful keys are:
- tab (once/twice) - shows the next possible commands/option(s)
- up/down arrow - navigates up/down in the command history
- ls - shows sub-nodes
- show - shows available configuration in the node
- cntrl e - gets the current parameter value for editting
Other hints:
- Use backslash '\' to escape spaces, '\' and other control
characters when assigning values to parameters.
--:- / cli-> wiz
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = no
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS8032-0530044575
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = yes
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Some basic and useful keys are:
- tab (once/twice) - shows the next possible option(s)
- cntrl e - gets the current parameter value for editting
Other hints:
- Use backslash '\' to escape spaces, '\' and other control
characters when assigning values to parameters.
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status (disabled,enabled) [enabled] :
ipv4_method (dhcp,ipv4_address_unconfigured,static) [dhcp] :
enable_lldp (no,yes) [no] : yes
ipv6_method (dhcpv6,ipv6_address_unconfigured,stateless,static) [stateless] :
mac address: 00:e0:86:29:15:a8
dns:
primary_dns :
secondary_dns :
domain :
hostname [ACS8032-0530044575] : ACS-Vogell
ipv6:
enable_ipv6 (no,yes) [yes] : no
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = yes
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS-Vogell
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = no
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Are all these parameters correct? (no, yes, quit) [no] :
--:- / cli-> reboot
Rebooting the appliance will cause all currently active sessions to be disconnected.
Are you sure you want to reboot the appliance? (yes, no) : yes
--:- / cli->
Broadcast message from root@ACS8032-0530044575 (Thu Apr 6 16:07:▒ 2017):
The system is going down for reboot NOW!
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Stopping cacpd: cacpd.
stopping Busybox Periodic Command Scheduler: crond... done.
Signal Terminated sent to dial-in daemon.
Stopping GSP connection API daemon.
GSP Serial Daemon killed, PID file removed.
Stopping logpipe: logpipe.
Stopping power management service.
stopped process in pidfile '/var/run/pmdng.pid' (pid 2040)
Stopping wireless modem daemon.
Stopping Data Buffering daemon.
Stopping event notification:event_notify.
Stopping socket client daemon.
Stopping uicontrold: uicontrold.
Stopping adsap2d: adsap2d.
Stopping sshd:stopped /usr/sbin/sshd (pid 1365)
done.
Stopping web server: apache2.
stopping mountd: done
stopping nfsd: done
Stopping network management services:stopped /usr/sbin/snmpd (pid 1401)
no /usr/sbin/snmptrapd found; none killed
snmpd, snmptrapd.
Stopping internet superserver: xinetd.
stopping statd: done
Stopping LLDP services
return code is 0
Stopping strongSwan IPsec...
Stopping aidpd: aidpd.
Stopping environd: environd.
Calling modprobe for IPv6
Deconfiguring network interfaces... ifdown: interface eth0 not configured
ifdown: interface eth1 not configured
done.
Stopping rpcbind daemon...
done.
Stopping NTP Clientstart-stop-daemon: warning: killing process 1996: No such process
.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
[176577.522210] watchdog watchdog0: watchdog did not stop!
Syncing hardware clock to system time
Unmounting remote filesystems...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab
Rebooting... [176580.781823] reboot: Restarting system
U-Boot SPL 2015.01-00146-gae650bc (Sep 21 2016 - 12:18:56) ACS 1.17
qspi boot
U-Boot 2015.01-00146-gae650bc (Sep 21 2016 - 12:18:56) ACS 1.17
Board: avocent dedhamlpc
Status: SLC_RST (0x00080000)
I2C: ready
DRAM: ECC disabled 1 GiB
MMC: zynq_sdhci: 0, zynq_sdhci: 1
SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB
In: serial
Out: serial
Err: serial
SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB
SERIAL NO.: 0530044575
MPN: 500-253-501
LAN1: 00:e0:86:29:15:a8
LAN2: 00:e0:86:29:15:a9
SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB
Loading PL fabric from QSPI
PL loaded successfully
Net: Gem.e000b000, Gem.e000c000
Hit any key to stop autoboot: 0
Booting from hw, image #1 VERSION=1.0.1.2278+529+20+11 ...
## PL loaded successfully
3338080 bytes read in 186 ms (17.1 MiB/s)
12940 bytes read in 32 ms (394.5 KiB/s)
## bootargs: console=ttyPS0,9600n8 root=/dev/mmcblk0p9 rw rootfstype=ext4 rootwait earlyprintk
## Booting kernel from Legacy Image at 02080000 ...
Image Name: Linux-3.17.0-xilinx
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3338016 Bytes = 3.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 02000000
Booting using the fdt blob at 0x2000000
Loading Kernel Image ... OK
Loading Device Tree to 1fff9000, end 1ffff28b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.17.0-xilinx (acs@NGACS-BUILD) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Sep 21 11:59:27 CDT 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Dedham
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @eefd9000 s8192 r8192 d12288 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
[ 0.000000] Kernel command line: console=ttyPS0,9600n8 root=/dev/mmcblk0p9 rw rootfstype=ext4 rootwait earlyprintk
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1032756K/1048576K available (4555K kernel code, 209K rwdata, 1452K rodata, 232K init, 197K bss, 15820K reserved, 270336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05e606c (6009 kB)
[ 0.000000] .init : 0xc05e7000 - 0xc0621000 ( 232 kB)
[ 0.000000] .data : 0xc0622000 - 0xc0656740 ( 210 kB)
[ 0.000000] .bss : 0xc0656740 - 0xc0687e90 ( 198 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: platform provided aux values match the hardware, so have no effect. Please remove them.
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46060001
[ 0.000000] slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000008] sched_clock: 64 bits at 383MHz, resolution 2ns, wraps every 2868291043328ns
[ 0.000094] timer #0 at f0006000, irq=43
[ 0.000326] Console: colour dummy device 80x30
[ 0.000344] Calibrating delay loop... 1528.62 BogoMIPS (lpj=7643136)
[ 0.090170] pid_max: default: 32768 minimum: 301
[ 0.090287] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090298] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090786] CPU: Testing write buffer coherency: ok
[ 0.090947] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091020] Setting up static identity map for 0x454318 - 0x454370
[ 0.092384] CPU1: Booted secondary processor
[ 0.130159] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.130223] Brought up 2 CPUs
[ 0.130238] SMP: Total of 2 processors activated.
[ 0.130243] CPU: All CPU(s) started in SVC mode.
[ 0.130669] devtmpfs: initialized
[ 0.132334] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.133004] regulator-dummy: no parameters
[ 0.135614] NET: Registered protocol family 16
[ 0.136387] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.137239] cpuidle: using governor ladder
[ 0.137254] cpuidle: using governor menu
[ 0.142187] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.142199] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.142303] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.149477] VCCPINT: 1000 mV
[ 0.149874] vgaarb: loaded
[ 0.149971] avocent-acs-syscfg initialized. 32 ports
[ 0.150421] SCSI subsystem initialized
[ 0.150722] usbcore: registered new interface driver usbfs
[ 0.150796] usbcore: registered new interface driver hub
[ 0.150975] usbcore: registered new device driver usb
[ 0.151250] EDAC MC: Ver: 3.0.0
[ 0.152485] Switched to clocksource arm_global_timer
[ 0.163795] NET: Registered protocol family 2
[ 0.164498] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.164580] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.164706] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.164772] TCP: reno registered
[ 0.164787] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.164836] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.165048] NET: Registered protocol family 1
[ 0.165322] RPC: Registered named UNIX socket transport module.
[ 0.165331] RPC: Registered udp transport module.
[ 0.165338] RPC: Registered tcp transport module.
[ 0.165344] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.165746] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.166755] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.166840] audit: initializing netlink subsys (disabled)
[ 0.166879] audit: type=2000 audit(0.150:1): initialized
[ 0.168194] Registering unionfs 2.6 (for 3.17.0-rc1)
[ 0.168652] fuse init (API version 7.23)
[ 0.169075] msgmni has been set to 1489
[ 0.169768] bounce: pool size: 64 pages
[ 0.169834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.169849] io scheduler noop registered
[ 0.169860] io scheduler deadline registered
[ 0.169890] io scheduler cfq registered (default)
[ 0.170913] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-2364208
[ 0.170928] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.171642] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 6249999) is a xuartps
[ 6.836936] console [ttyPS0] enabled
[ 6.880011] Serial driver for Avocent FPGA based UARTs Rev: 3.12
[ 6.951831] avctserial.0: ttyS1 at MMIO 0x40002000 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.052811] avctserial.0: ttyS2 at MMIO 0x40002020 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.153835] avctserial.0: ttyS3 at MMIO 0x40002040 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.254897] avctserial.0: ttyS4 at MMIO 0x40002060 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.355900] avctserial.0: ttyS5 at MMIO 0x40002080 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.456895] avctserial.0: ttyS6 at MMIO 0x400020a0 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.557937] avctserial.0: ttyS7 at MMIO 0x400020c0 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.658973] avctserial.0: ttyS8 at MMIO 0x400020e0 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.760007] avctserial.0: ttyS9 at MMIO 0x40002100 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.861044] avctserial.0: ttyS10 at MMIO 0x40002120 (irq = 61, base_baud = 6250000) is a FPGA
[ 7.963112] avctserial.0: ttyS11 at MMIO 0x40002140 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.065201] avctserial.0: ttyS12 at MMIO 0x40002160 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.167279] avctserial.0: ttyS13 at MMIO 0x40002180 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.269343] avctserial.0: ttyS14 at MMIO 0x400021a0 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.371434] avctserial.0: ttyS15 at MMIO 0x400021c0 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.473504] avctserial.0: ttyS16 at MMIO 0x400021e0 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.575590] avctserial.0: ttyS17 at MMIO 0x40002200 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.677658] avctserial.0: ttyS18 at MMIO 0x40002220 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.779744] avctserial.0: ttyS19 at MMIO 0x40002240 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.881814] avctserial.0: ttyS20 at MMIO 0x40002260 (irq = 61, base_baud = 6250000) is a FPGA
[ 8.983899] avctserial.0: ttyS21 at MMIO 0x40002280 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.085985] avctserial.0: ttyS22 at MMIO 0x400022a0 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.188058] avctserial.0: ttyS23 at MMIO 0x400022c0 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.290132] avctserial.0: ttyS24 at MMIO 0x400022e0 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.392204] avctserial.0: ttyS25 at MMIO 0x40002300 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.494279] avctserial.0: ttyS26 at MMIO 0x40002320 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.596360] avctserial.0: ttyS27 at MMIO 0x40002340 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.698441] avctserial.0: ttyS28 at MMIO 0x40002360 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.800495] avctserial.0: ttyS29 at MMIO 0x40002380 (irq = 61, base_baud = 6250000) is a FPGA
[ 9.902577] avctserial.0: ttyS30 at MMIO 0x400023a0 (irq = 61, base_baud = 6250000) is a FPGA
[ 10.004646] avctserial.0: ttyS31 at MMIO 0x400023c0 (irq = 61, base_baud = 6250000) is a FPGA
[ 10.106736] avctserial.0: ttyS32 at MMIO 0x400023e0 (irq = 61, base_baud = 6250000) is a FPGA
[ 10.208793] avctserial.0: ttyS33 at MMIO 0x40003000 (irq = 61, base_baud = 6250000) is a FPGA
[ 10.310876] avctserial.0: ttyS34 at MMIO 0x40003020 (irq = 61, base_baud = 6250000) is a FPGA
[ 10.413105] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to f0064000
[ 10.489812] brd: module loaded
[ 10.528697] loop: module loaded
[ 10.567101] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[ 10.627756] 6 ofpart partitions found on MTD device spi32766.0
[ 10.697426] Creating 6 MTD partitions on "spi32766.0":
[ 10.758873] 0x000000000000-0x000000020000 : "qspi-fsbl-boot"
[ 10.827403] 0x000000020000-0x000000040000 : "qspi-env"
[ 10.888820] 0x000000040000-0x000000060000 : "qspi-env-backup"
[ 10.957723] 0x000000060000-0x000000100000 : "qspi-uboot"
[ 11.021280] 0x000000100000-0x000000101000 : "qspi-unitdata"
[ 11.087818] 0x000000400000-0x000000800000 : "qspi-bitstream"
[ 11.157685] libphy: XEMACPS mii bus: probed
[ 11.207895] xemacps e000b000.ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 11.295145] xemacps e000c000.ethernet: pdev->id -1, baseaddr 0xe000c000, irq 77
[ 11.382312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.460148] ehci-pci: EHCI PCI platform driver
[ 11.513418] ULPI transceiver vendor/product ID 0x0424/0x0009
[ 11.580911] Found SMSC USB334x ULPI transceiver.
[ 11.636114] ULPI integrity check: passed.
[ 11.684171] zynq-ehci zynq-ehci.0: Xilinx Zynq USB EHCI Host Controller
[ 11.763209] zynq-ehci zynq-ehci.0: new USB bus registered, assigned bus number 1
[ 11.872531] zynq-ehci zynq-ehci.0: irq 76, io mem 0x00000000
[ 11.952500] zynq-ehci zynq-ehci.0: USB 2.0 started, EHCI 1.00
[ 12.021002] hub 1-0:1.0: USB hub found
[ 12.065084] hub 1-0:1.0: 1 port detected
[ 12.112368] usbcore: registered new interface driver usb-storage
[ 12.183928] usbcore: registered new interface driver usbserial
[ 12.253609] usbcore: registered new interface driver usbserial_generic
[ 12.331729] usbserial: USB Serial support registered for generic
[ 12.403607] usbcore: registered new interface driver ftdi_sio
[ 12.472348] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 12.560349] mousedev: PS/2 mouse device common for all mice
[ 12.626832] i2c /dev entries driver
[ 12.668582] cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 57
[ 12.740624] rtc-ds1307 1-0068: rtc core: registered m41t00 as rtc0
[ 12.813679] cdns-i2c e0005000.i2c: 400 kHz mmio e0005000 irq 80
[ 12.872517] usb 1-1: new high-speed USB device number 2 using zynq-ehci
[ 12.964301] lm75 1-0048: hwmon0: sensor 'lm75'
[ 13.017421] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at f007e000 with timeout 10s
[ 13.115974] zynq-edac f8006000.memory-controller: ecc not enabled
[ 13.188756] Xilinx Zynq CpuIdle Driver started
[ 13.242008] sdhci: Secure Digital Host Controller Interface driver
[ 13.315708] sdhci: Copyright(c) Pierre Ossman
[ 13.367778] sdhci-pltfm: SDHCI platform and OF driver helper
[ 13.435677] sdhci-arasan e0101000.sdhci: No vmmc regulator found
[ 13.507359] sdhci-arasan e0101000.sdhci: No vqmmc regulator found
[ 13.580438] hub 1-1:1.0: USB hub found
[ 13.625282] hub 1-1:1.0: 4 ports detected
[ 13.692519] mmc0: SDHCI controller on e0101000.sdhci [e0101000.sdhci] using ADMA
[ 13.780288] sdhci-arasan e0100000.sdhci: No vmmc regulator found
[ 13.854049] sdhci-arasan e0100000.sdhci: No vqmmc regulator found
[ 13.962499] mmc1: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA
[ 14.050426] usbcore: registered new interface driver usbhid
[ 14.066036] mmc0: BKOPS_EN bit is not set
[ 14.068074] mmc0: new high speed MMC card at address 0001
[ 14.068396] mmcblk0: mmc0:0001 016G70 14.6 GiB
[ 14.068484] mmcblk0boot0: mmc0:0001 016G70 partition 1 4.00 MiB
[ 14.068568] mmcblk0boot1: mmc0:0001 016G70 partition 2 4.00 MiB
[ 14.068651] mmcblk0rpmb: mmc0:0001 016G70 partition 3 4.00 MiB
[ 14.127354] mmcblk0: p1 < p5 p6 p7 p8 p9 p10 p11 p12 >
[ 14.131021] mmcblk0boot1: unknown partition table
[ 14.132196] mmcblk0boot0: unknown partition table
[ 14.671948] usbhid: USB HID core driver
[ 14.719329] Netfilter messages via NETLINK v0.30.
[ 14.774736] ip_set: protocol 6
[ 14.811324] TCP: cubic registered
[ 14.850725] NET: Registered protocol family 17
[ 14.904018] Registering SWP/SWPB emulation handler
[ 14.961137] usb 1-1.1: new high-speed USB device number 3 using zynq-ehci
[ 15.043392] rtc-ds1307 1-0068: setting system clock to 2017-04-06 16:07:52 UTC (1491494872)
[ 15.156352] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
[ 15.252293] VFS: Mounted root (ext4 filesystem) on device 179:9.
[ 15.325280] devtmpfs: mounted
[ 15.359929] Freeing unused kernel memory: 232K (c05e7000 - c0621000)
[ 15.364071] hub 1-1.1:1.0: USB hub found
[ 15.364654] hub 1-1.1:1.0: 4 ports detected
[ 15.542716] usb 1-1.2: new high-speed USB device number 4 using zynq-ehci
m▒ 15.779690] hub 1-1.2:1.0: 4 ports detected-1.2:1.0: USB hub found
INIT: version 2.88 ACS8000 init
Starting init_acs8000.sh
boot from hardware - mount /var in RAM disk
Starting init_hw_boot.sh
[ 16.803049] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
Current boot image: 1.
[ 16.920543] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Completed init_hw_boot.sh
[ 17.151462] random: nonblocking pool is initialized
Console speed is 9600
[ 17.360932] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
Completed init_acs8000.sh
Starting udev
unitdata ...
bootlogd: cannot allocate pseudo tty: No such file or directory
checkroot ..
ramdisk ...
mountall ...
Populating volatile Filesystems.
devpts ...
/etc/init.d/rc: Called, Params: start
Hostname: 'ACS8032-0530044575'
Calling modprobe for IPv6
Setting up IP spoofing protection: rp_filter.
Enabling packet forwarding... done.
Configuring network interfaces... udhcpc (v1.22.1) started
Updating LLDP services IP address information
return code is 0
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Updating LLDP services IP address information
return code is 0
No lease, failing
RTNETLINK answers: No such process
done.
mountnfs ...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
Finish ...
Making root file system read-only.
INIT: Entering runlevel: 5
Waiting for /dev to be fully populated ... done.
Starting cacpd: cacpd.
Starting event notification:event_notify.
Starting GSP connection API daemon.
Starting uicontrold: uicontrold.
Starting adsap2d: Fork Successful. Retval: 0
adsap2d.
Starting sshd:done.
Starting rpcbind daemon...done.
starting statd: done
NFS daemon support not enabled in kernel
Starting network management services: snmpd.
Starting internet superserver: xinetd.
Starting aidpd: Fork Successful. Retval: 0
aidpd.
Starting environd: Fork Successful. Retval: 0
environd.
starting Busybox Periodic Command Scheduler: crond... done.
Starting Data Buffering daemon.
dial-in daemon successfully started with PID 1580.
Starting logpipe: logpipe.
Starting Socket Client daemon.
Starting wireless modem daemon.
GSP Serial Daemon successfully started with PID 1771.
Starting NTP Client.
Starting power management service.
Starting strongSwan 5.2.1 IPsec [starter]...
Starting LLDP services
LLDP is not enabled.
return code is 0
Starting web server: apache2.
/etc/init.d/rc: Called, Params: start
ACS8000 1.0.1-20160921 ACS8032-0530044575 /dev/ttyPS0
login: Starting watchdog timer
login: admin
Password:
Welcome to ACS8000 <ACS8032-0530044575>.
Type help for more information.
--:- / cli->
--:- / cli->
--:- / cli-> wiz
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = no
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS8032-0530044575
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = yes
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Some basic and useful keys are:
- tab (once/twice) - shows the next possible option(s)
- cntrl e - gets the current parameter value for editting
Other hints:
- Use backslash '\' to escape spaces, '\' and other control
characters when assigning values to parameters.
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status (disabled,enabled) [enabled] : enabled
ipv4_method (dhcp,ipv4_address_unconfigured,static) [dhcp] : static
static:
ipv4_address [192.168.160.10] : 10.9.2.14
ipv4_mask [255.255.255.0] : 255.255.254.0
ipv4_default_gateway : 10.9.2.1
enable_lldp (no,yes) [no] : yes
ipv6_method (dhcpv6,ipv6_address_unconfigured,stateless,static) [stateless] :
mac address: 00:e0:86:29:15:a8
dns:
primary_dns : 10.9.6.5
secondary_dns : 10.9.6.6
domain : gi-de.com
hostname [ACS8032-0530044575] : AVS-VOGELL
ipv6:
enable_ipv6 (no,yes) [yes] : no
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = static
ipv4_address = 10.9.2.14
ipv4_mask = 255.255.254.0
ipv4_default_gateway = 10.9.3.1
enable_lldp = yes
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns = 10.9.6.5
secondary_dns = 10.9.6.6
domain = gi-de.com
hostname = AVS-VOGELL
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = no
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Are all these parameters correct? (no, yes, quit) [no] : yes
--:- / cli->
Broadcast message from root@AVS-VOGELL (Thu Apr 6 16:16:59 201▒:
The system is going down for system halt NOW!
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Stopping cacpd: cacpd.
stopping Busybox Periodic Command Scheduler: crond... done.
Signal Terminated sent to dial-in daemon.
Stopping GSP connection API daemon.
GSP Serial Daemon killed, PID file removed.
Stopping logpipe: logpipe.
Stopping power management service.
stopped process in pidfile '/var/run/pmdng.pid' (pid 2026)
Stopping wireless modem daemon.
Stopping Data Buffering daemon.
Stopping event notification:event_notify.
Stopping socket client daemon.
Stopping uicontrold: uicontrold.
Stopping adsap2d: adsap2d.
Stopping sshd:stopped /usr/sbin/sshd (pid 1365)
done.
Stopping web server: apache2.
stopping mountd: done
stopping nfsd: done
Stopping network management services:stopped /usr/sbin/snmpd (pid 4481)
no /usr/sbin/snmptrapd found; none killed
snmpd, snmptrapd.
Stopping internet superserver: xinetd.
stopping statd: done
Stopping LLDP services
return code is 0
Stopping strongSwan IPsec...
Stopping aidpd: aidpd.
Stopping environd: environd.
Calling modprobe for IPv6
Deconfiguring network interfaces... ifdown: interface eth1 not configured
done.
Stopping rpcbind daemon...
done.
Stopping NTP Clientstart-stop-daemon: warning: killing process 1982: No such process
.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
[ 584.181968] watchdog watchdog0: watchdog did not stop!
Syncing hardware clock to system time
Unmounting remote filesystems...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab
halt ...
[ 587.443969] reboot: System halted
[ 587.482632] System Halted, OK to turn off power
2. Completing the First Time Configuration screen using browser to visit ip address configured on Step 1
Step 1 – Security Profile
Select the desired Security Profile. Click
Next when finished.
 |
|
|
Step 2 – Network Parameters
Set the desired Network parameters. Click
Next when finished.
 |
| Avocent ACS8000 Network Configuration |
Step 3 – Ports
The default CAS Profile configuration
will be applied for all serial ports. Set the
desired CAS profile parameters. By default,
all ports are enabled. Click Next when
finished.
 |
| Avocent ACS8000 Ports Configuration |
Step 4 – Change root/admin
password and add new uers
Click the root link in the Users table.
Enter and confirm the new password
and click Next. Click the admin link. Enter
and confirm the new password and click
Next. Click Save to apply and save the
configuration, then click Finish.
 |
| Avocent ACS8000 User Configuration |
The console system is now configured and
ready to accept users and connections to
the ports.
 |
| Avocent ACS8000 System Configuration |
 |
| Avocent ACS8000 Serial Ports |
Reference:
- AVOCENT® ACS 8000ADVANCED CONSOLE SERVER Data Sheet
- Avocent® ACS 8000 Advanced Console SystemQuick Installation Guide
2023 Mar 16 04:49:09 ACS-DC1 DLA[32269], Getting this error on ACS after reboot i am unable to access devices via console.