 |
| Cisco Device Mini USB Port |
Cisco has added mini usb port into their products for many years.
The key to use this port is to get a right cable. At most situations we are using regular RJ45 console port with a USB to Serial Adapter connecting to your computers. Occasionally, you may need to have another console access for your multiple person’s troubleshooting console access. Some devices may still have AUX port. For 2960x switches, AUX port is gone.
 |
| RJ-45 Console Cable with USB Adapter |
If you would like to use mini usb port, you will have to find a USB to mini usb cable such as below.
 |
| Cisco Mini USB Console Cable |
 |
| Cisco Router’s Back Ports |
 |
| Cisco Mini USB Console Cable connecting Cisco Router to Laptop |
2. Install Cisco USB Console drivers on your computer:
You may need to reboot your computer.
3. Confirm the COM port number:
In this case, it is using COM6 port.
4. Set up Serial access using PuTTy
5. Console Outputs once connected successfully.
Notes:
- USB console is taking precedence before Rj45 console access for input.
- Update Driver manually if it is not working properly.
Tendrás el driver para el puerto mini usb de los juniper SRX?
You are asking "You have the driver for the mini USB port of the Juniper SRX ?"
No, I do not have specific driver for SRX Mini USB port. I have cisco mini usb driver and it should be same, should not it?
I did a quick search from SRX Software download website, I found this driver – CP210xVCP USB Console Driver and the link is https://webdownload.juniper.net/swdl/dl/secure/site/1/record/56509.html
Google 'CP210x VCP USB Console Driver', you should get lots of links to download it. But I am not 100% sure this is exactly you are looking for.
Can I use generic mini-b usb cable and not the cable from Cisco