There is 2012 Appliance 4205 in the environment. Some basic configuration done, including internal interface and gateway. But after a couple of times failed attempt to upgrade OS from R75 Splat to R75.40 Gaia, I have to stop to see where is wrong.
The failed screenshot is showing in the following:
The package name is Check_Point_Upgrade_for_R75.40.Splat_to_Gaia.tgz download from https://supportcenter.checkpoint.com/supportcenter/portal/role/supportcenterUser/page/default.psml/media-type/html?action=portlets.DCFileAction&eventSubmit_doGetdcdetails=&fileid=14899&from=wizard.
Followed command line installation guide:
1. Upload the upgrade package through the GUI, it will be placed in: /var/log/cpupgrade/web/
2. Move upgrade.tgz into /var/upgrade
3. #tar -zxvf upgrade.tgz
4. #./UnixInstallScript -NOCRS In R75.20 the install script is installme.sh
5. Reboot when complete and login to verify upgrade
Notes:
Do not forget put idle 999 in, else you will get following auto log out messages:
[Expert@CP-Management]# ls
CPsecplPtchMod base lib stam.tgz upgrade_config.xml
Creating upgrade image is ok [CP-Management]# Idle timeout expired, performing auto-logout…
Actually, in my this case, the real reason for failure is because we did not run first time installation wizard and Checkpoint Package did not install first. After tried cpconfig finished first time installation wizard, upgrade was successful.
Situation:Experienced similiar issue happened two years ago again. Trying to upgrade R75.40 Splat Checkpoint Box to R77.10 Gaia, but it was failed from Webui. Webui will not give you too much information to let you troubleshoot it.Last time the fix for me is to chose Splat version to upgrade from…
One day when pushing firewall policy from Checkpoint management server to UTM 272 cluster gateways, it failed and I got error message "Load on module failed - no memory" on one of cluster members."Network Security Policy 'Montreal_DMZ' was prepared on Tue Sep 16 10:00:58 2014.The following errors and warnings exist:Installation…
Checkpoint SPLAT WebUI brings some crucial features when working on configuration or maintenance, especially for operations. In some certain environment, browser compatibility really bothers me a lot. Here is the envrionment:SPLAT version R75.40 (but same on R75.20 and R75.30)1. Chrome2. IE 8Some machines I got the following error "You must…
4 thoughts on “Upgrade Checkpoint from Command Line after failed from Webui”
Hey Johnny, I had the same problem here with my 75.20 to Gaia R77, failed thru the WebUI. When you move it to /var/upgrade do you mean to a new folder called upgrade or just moved to /var/ ? Good post btw.. Regards, Alex
Move it to new folder which name is upgrade. This would be the last resort to resolve upgrade issue. If still does not work, I would suggest to try new installation with exported the configuration.
By the way, if you use the web GUI to upload the checkpoint file you downloaded, only then will it be found in: /var/log/cpupgrade/web/ and be named upgrade.tgz
Otherwise you can just use WINSCP (or something of the like) and manually upload the file to the device. Then you use that same tar command mentioned and unpack.
Fun times and thanks for the article on this. BurnoutTech
Hey Johnny,
I had the same problem here with my 75.20 to Gaia R77, failed thru the WebUI.
When you move it to /var/upgrade do you mean to a new folder called upgrade or just moved to /var/ ?
Good post btw..
Regards,
Alex
Move it to new folder which name is upgrade. This would be the last resort to resolve upgrade issue. If still does not work, I would suggest to try new installation with exported the configuration.
By the way, if you use the web GUI to upload the checkpoint file you downloaded, only then will it be found in: /var/log/cpupgrade/web/ and be named upgrade.tgz
Otherwise you can just use WINSCP (or something of the like) and manually upload the file to the device. Then you use that same tar command mentioned and unpack.
Fun times and thanks for the article on this.
BurnoutTech
I followed this instructions and i got :
Upgrade Failed doing automatic revert in…..done
System is going down to reboot NOW !
:'(